Advertisement
ASSEMBLY INSTRUCTIONS
1
DB
EJ
Front View
EJ
2
DB
DC
PROPANE MODEL ONLY
Note: You will need two people for this step.
Assemble the tank exclusion (EJ) to the left and
right cart side panels (DA, DB), as shown.
Note: The left cart side panel (DB) will have
DA
large holes on the end of the legs for assem-
bling the wheel axle (DI).
DA
Note: Turn Cart assembly over. Front panel
DA
should be facing upward.
Assemble the back brace (DC) to the rear, left
and right cart side panels (DA, DB), as shown.
YOU WILL NEED:
5
X 4
6
ASSEMBLY INSTRUCTIONS
3
DH
DI
4
DA
DD
Back View
Note: Turn Cart assembly upside down.
DH
DG
a. Place wheel (DH) and wheel spacer (#8) onto
wheel axle (DI). "Cone" side of wheel should be
against cart side panel.
Insert wheel axle assembly (DI) through wheel
axle hole in the front and rear, of the left cart
side panel (DB), as shown.
To complete wheel assembly, position the
wheel spacer (#8), wheel (DH), wheel washer
(#13) and hitch pin (#9), onto wheel axle (DI), as
shown.
b. Insert wheel cap (DG) into wheel (DH).
YOU WILL NEED:
6
7
13
8
9
8
X 2
X 1
X 1
Assemble the front panel (DD) to the left and
right cart side panels (DA and DB), as shown.
DB
Ensure that the slots on the tank exclusion (EJ)
align with the slots on the front panel (DD).
NATURAL GAS MODEL WILL NOT
HAVE WIRE-TANK EXCLUSION (EJ)
SHOWN IN IMAGE.
YOU WILL NEED:
5
X 6
7
Advertisement
