Using The Programmer/Clock - Belling GOURMET 900 DF Service Manual

Using The Programmer/Clock

Through your programmer you will be able to set the time
of day, set the minute minder, and use the semi and fully
automatic cooking functions. The programmer is vital to
the working of your appliance, and reading this section will
make sure that you get the most out of your ovens.
The programmer buttons
There are three buttons on this type of timer. The table
below shows you what their symbols look like, depending on
the model type, and what they do.
Symbol Symbol
-
+
Setting the time of day
Press the Plus and Minus buttons together for a
N
few seconds and release.
Set the time of day using the Plus and Minus but-
N
tons. Press once for single digit increase, press and
hold for rapid increase..
Once the time of day has been set wait approx 10
N
seconds until the 'G' stops flashing.
Use the appliance as normal.
N
Setting an alarm tone
There are three tones to choose from.
Press and release the minus button.
G
Once the minus button is released, the tone is selected.
G
What is it?
Down / Minus
Used to decrease cook / end time, remove
minutes from the minute minder and adjust
the time of day.
Also for listening to and setting the alarm
tone.
Up / Plus
Used to increase cook / end time, add minutes
to the minute minder and adjust the time of
day.
Function button
Used to select the functions available on this
timer.
Press once for: Minute Minder.
Press twice for: Cook time
Press three times for: End time.
How to use these functions is explained later
on in this section.
6
What your timer symbols
mean.
Automatic
Cook Pot
symbol
A
This is a 24 hour clock.
i
Before you do anything
with your appliance -
you must set the cor-
rect time of day.
A
Minute Minder
symbol