Telescopic Shelving System - Belling GOURMET 900 DF Service Manual

Telescopic Shelving System (if fitted)
In addition to the traditional shelving fitted into your
G
appliance, the telescopic shelving system is fitted in the
most commonly used location in your cavity.
The shelves with the telescopic system are easier to
G
pull out than traditional shelving, which means the
oven door stays open for a shorter period of time. The
smooth action also reduces the likelihood of fat, or
food, spillage, and gives you extra security.
You do not have to use the telescopic shelves all of the
G
time, you can place the shelves in the traditional posi-
tions if you would like more choice.
The telescopic shelves remove easily from the runner
G
for re-positioning or cleaning, but we recommend that
you reposition your shelving before cooking, and
remove the shelving for cleaning when the shelves are
cold to prevent burning yourself.
To remove the telescopic shelves
Make sure the shelf is cool enough to touch.
G
Push the oven shelf back into the cavity, until it hits
G
the stop position.
Grasp the shelf bars in the centre, and lift the back of
G
the shelf clear of the stop position.
You can then lift the front of the shelf clear of the
G
retaining tabs.
To replace the telescopic shelves
Make sure the oven runners are pushed all the way
G
back into the cavity.
Tilt the shelf and make sure the front of the shelf is
G
against the stop position.
Carefully place the shelf back onto the runner and snap
G
in place firmly.
Make sure the back of the self is inside the retaining
G
tabs and slide it in and out of the oven to make sure it
works correctly.
Standard shelves are removed by pulling them straight
G
out towards you and are replaced by sliding them
straight into the oven to the back of the cavity.
These shelves can be cleaned in the dishwasher.
G
Standard shelves
22
Standard shelving positions
Telescopic shelf position
Standard shelving positions
Telescopic shelf position
Make sure the shelf
is firmly pressed against
Note: Make sure the shelf is
the stop position at
unclipped from the retaining
back of the oven cavity
tabs before removal.
2. Lift shelf
1. Grasp and
clear
lift shelf bars