Telephone Controls; Using The Telephone; Making A Call; Remote Control - Ford Ranger Owner's Manual

TELEPHONE CONTROLS

Remote control

Accept and reject call button
A Reject call
B Accept call
Incoming calls can be accepted by pressing
the answer call button once. Press the
reject call button to end the call or to reject
the incoming call.

USING THE TELEPHONE

Note: You can exit the phone menu by
pressing any source button CD, RADIO or
AUX.
Note: When referred to, the use of the seek
up and seek down buttons can be used on
either the steering wheel or the audio unit.
This chapter describes the phone functions
of the audio unit.
An active phone must be present.
Even if connected to the audio unit, your
phone can still be used in the usual way.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Telephone

Making a call

Dialling a number using voice control
Phone numbers can be dialled using voice
control. See Telephone commands
(page 229).
Dialling a number using the address
book
You can access your phone address book
via Bluetooth. The entries will appear in
the unit display.
1. Press the PHONE button.
2. Press the up/down arrow buttons until
PHONEBOOK is shown.
3. Press the OK button.
Note: You can also use the telephone
keypad to select the first letter of the entry
you are looking for. Press the relevant
number that corresponds to the letter
repeatedly until the required letter is
displayed.
4. Press the up/down arrow buttons to
select the desired phone number.
Note: Press and hold the up/down arrow
buttons to search forwards or backwards
within the phonebook.
5. Press the OK button to dial the
selected phone number.
Dialling a number using the telephone
keypad
If you have an audio unit with a telephone
keypad (buttons 0-9, * and #):
1. Press the PHONE button.
2. Press the up/down arrow buttons until
DIAL NUMBER is shown.
3. Press the OK button.
4. Dial the number using the telephone
keypad on the audio unit.
5. Press the OK button.
217