Telephone Controls; Making A Call; Remote Control; Using The Telephone - Vehicles Without: Navigation System - Ford Transit Owner's Manual

TELEPHONE CONTROLS

Remote control

Voice and mode button
1 Voice button
2 Mode button
Incoming calls can be accepted by pressing
the MODE button once. Press the button
again to end the call.
USING THE TELEPHONE -
VEHICLES WITHOUT:
NAVIGATION SYSTEM
This chapter describes the phone functions
of the audio unit.
Note: Refer to your audio guide for details
of the controls.
An active phone must be present.
Even if connected to the audio unit, your
phone can still be used in the usual way.
Note: You can exit the phone menu by
pressing any source button CD, AM/FM or
AUX.
Transit (TT9) Vehicles Built From: 26-09-2011, Vehicles Built Up To: 31-12-2013
Telephone

Making a call

Dialling a number using voice control
Phone numbers can be dialled using voice
control. See Telephone commands
(page 221).
Dialling a number using the address
book
You can access your phone address book
via Bluetooth. The entries will appear in
the unit display.
1. Press the PHONE or the call accept
button.
2. Press the MENU button.
3. Keep pressing the MENU button until
PHONEBOOK appears.
4. Press the seek buttons to select the
desired phone number.
Note: Press and hold the seek button to
skip to the next letter in the alphabet.
5. Press the PHONE or the call accept
button to dial the selected phone
number.
Dialling a number using the address
book - Sony radio
You can access your phone address book
via Bluetooth. The entries will appear in
the unit display.
1. Press the PHONE button.
2. Press the seek button until the phone
book is shown.
3. Press the up/down arrow buttons to
select the desired phone number.
Note: Press and hold the up/down arrow
buttons to skip to the next letter in the
alphabet.
4. Press the PHONE or the call accept
button to dial the selected phone
number.
206