Isofix Anchor Points - Ford Ranger Owner's Manual

ISOFIX ANCHOR POINTS

WARNING
Use an anti-rotation device when
using the ISOFIX system. We
recommend that you use a top tether
or a support leg.
Note: When you are purchasing an ISOFIX
restraint, make sure that you know the
correct mass group and ISOFIX size class
for the intended seating locations. See
Child Seat Positioning (page 17).
Your vehicle is fitted with ISOFIX anchor
points that accommodate universally
approved ISOFIX child restraints.
The ISOFIX system comprises two rigid
attachment arms on the child restraint that
attach to anchor points on the 2nd row
seats, where the cushion and backrest
meet. Tether anchor points are fitted to
the back panel trim for child restraints with
a top tether.
Attaching a child restraint with a
top tether
WARNING
Do not attach a tether strap to
anything other than the correct
tether anchor point.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Child Safety
Double cab
1. Remove the head restraint. See Head
Restraints (page 78).
2. Place the child seat on the back seat
cushion and fold the relevant seatback
forward. See Rear Seats (page 78).
3. Route the tether strap to the anchor
point.
Make sure the top tether strap is not
slack or twisted and is properly
located on the anchor point.
20
WARNING