MANUAL TRANSMISSION
Selecting reverse gear
CAUTION
Do not engage reverse gear when the
vehicle is moving. This can cause
damage to the transmission.
Note: Fully depress the clutch pedal and
wait for three seconds before you select
reverse gear.
On some vehicles it is necessary to raise
the collar whilst selecting reverse gear.
FOUR-WHEEL DRIVE
Note: A clicking sound from the driveline
may be heard while shifting between ranges,
which is normal.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Transmission
Two-wheel drive, high range (2H)
Use for all normal road driving and also for
off-road driving across dry, level terrain.
Four-wheel drive, high range (4H)
Do not use four-wheel drive 4H for
normal road driving.
Note: The four-wheel drive indicator lamp
will come on when the transfer shift switch
is in the 4H position. See Warning Lamps
and Indicators (page 58).
Use for off-road driving.
Four-wheel drive, low range (4L)
Do not use four-wheel drive 4L for
normal road driving.
Note: The four-wheel drive low range 4L
and four-wheel drive indicator lamps will
come on when the transfer shift switch is in
the 4L position. See Warning Lamps and
Indicators (page 58).
94
WARNING
WARNING