Driver Configuration Mode; Child Play Protection Function - Ford Ranger Owner's Manual

Hide thumbs Also See for Ranger:
Table of Contents

Advertisement

WARNING
Do not activate double locking when
persons or animals are inside the
vehicle. You will not be able to
unlock the doors from inside if you have
double locked them.
Note: If the ignition is switched on with the
double locking function activated, the lock
will automatically return to single lock stage.
Double locking is a theft protection feature
that prevents someone from opening the
doors from the inside.
Note: The driver s door can be unlocked
with the key. This needs to be used if the
remote control is not functioning.
Note: If the vehicle remains locked for
several weeks, the remote control will be
disabled. The vehicle must be unlocked and
the engine started using the key. Unlocking
and starting the vehicle once will enable the
remote control.
Reprogramming the unlocking function
The unlocking function may be
reprogrammed so that only the driver s
door is unlocked. See Programming the
remote control (page 28).
Locking and unlocking confirmation
Note: When you lock the doors, the
direction indicators will flash once.
When you double lock the doors, the
direction indicators will flash twice.
When you unlock the doors the direction
indicators will flash one long flash.

Child play protection function

If the remote control buttons are pressed
continuously several times, the locking and
unlocking function will be blocked for a
while to avoid door latches from
overheating.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Locks
Locking and unlocking the doors
from inside
Press the button. For item
location. See At a Glance (page
9).
A
Unlock
B
Open

Driver configuration mode

Note: This operation has to be done within
30 seconds.
1.
Switch the ignition ON.
2. Press door lock button three times.
3. Switch the ignition OFF.
4. Press door lock button three times.
5. Switch the ignition ON.
The system will chirp to indicate that the
driver configuration mode is enabled.
Once in driver configuration mode, follow
the steps mentioned below to toggle the
status of the automatic locking by speed
or automatic unlocking.
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 ranger

Table of Contents