Wheel Drive Vehicles - Ford Ranger Owner's Manual

Note: When the system is deactivated with
the transfer switch in 2H position, the ESP
off indicator will flash twice to indicate that
the system is completely turned off and
remains illuminated. Press the switch again
to enable the system. For item location: See
At a Glance (page 9).
Note: ESP is switched off when the transfer
switch is in 4L position or the Electronic
Locking Differential is operating.

2-wheel drive vehicles

Press and hold the switch for one second
to deactivate Engine Traction Control,
Trailer Stability Control and Brake Traction
Control. Hill Start Assist remains active.
4-wheel drive vehicles
Note: All the stability control (ESP)
functions are reactivated when 2H position
is selected.
Transfer shift switch in 4H position:
• Press and hold the switch for one
second to deactivate Engine Traction
Control and Trailer Stability Control.
Hill Descent Control, Hill Start Assist
and Brake Traction Control remain
active.
Transfer shift switch in 4H or 4L position:
• Press and hold the switch for five
seconds to deactivate Engine Traction
Control, Trailer Stability Control and
Brake Traction Control. Hill Descent
Control and Hill Start Assist remain
active.
Transfer shift switch in 2H position:
• Press and hold the switch for one
second to deactivate Engine Traction
Control, Brake Traction Control and
Stability Control including Trailer
Stability Control. Hill Descent Control
and Hill Start Assist remain active.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Stability Control
103