Receiving A Second Incoming Call; Muting The Microphone; Receiving An Incoming Call; Changing The Active Phone - Ford Ranger Owner's Manual

Note: If you enter an incorrect digit whilst
entering a phone number, press function
button 3 to erase the last digit. A long press
will erase the complete string of digits.
Press and hold 0 to enter a + digit.
Ending a call
Calls can be ended by:
• Pressing the reject call button.
• Pressing the OK button.
• Pressing function button 4.
Redialling a number
1. Press the PHONE or the answer call
button.
2. Press the up/down arrow buttons until
CALL LISTS is displayed.
3. Press the OK button.
Note: If the active phone does not provide
a call out list, the last outgoing call
number/entry can be redialled.
4. Press the up/down buttons to select
the desired call list.
5. Press the OK button.
6. Press the up/down buttons to select
the desired phone number.
7. Press the OK button.
Redialling the last dialled number
1. Press the PHONE or the answer call
button.
2. Press the up/down arrow buttons until
REDIAL is displayed.
3. Press the OK button.

Receiving an incoming call

Accepting an incoming call
Incoming calls can be accepted by pressing
the answer call button, or by pressing the
OK button.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Telephone
Rejecting an incoming call
Incoming calls can be rejected by:
• Pressing the reject call button, or
• Pressing the arrow down button to
highlight REJECT and then pressing
the OK button.

Receiving a second incoming call

Note: The second incoming call function
must be activated in your phone.
If there is an incoming call whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Note: The first incoming call will be
disconnected and replaced by the second
incoming call.
Second incoming calls can be accepted
by pressing the answer call button on the
steering wheel, the PHONE button, or by
pressing the OK button on the audio unit.
Rejecting a second incoming call
Second incoming calls can be rejected by:
• Pressing the reject call button.
• Pressing the arrow down button to
highlight REJECT and then pressing
the OK button.
• Pressing function button 4.

Muting the microphone

Note: During a call, it is possible to mute
the microphone. Whilst muted, confirmation
will appear in the display.
Press function button 1. Press the button
once again to turn this function off.

Changing the active phone

Note: Phones must be bonded to the
system before they can be made active.
218