Ports - KGuard Security KG-SHA104 User Manual

If your ISP uses STATIC IP network, select STATCI network TYPE.
to the IP Address of your router
7. Click "APPLY" to save your changes.
If you are using PPPoE dial-up network, select PPPoE network TYPE.
known DDNS provider. Enter your DDNS Provider's HOST NAME, USERNAME, and PASSWORD
in the DDNS SETUP page.

5.2.6.3. Ports

Recommended media & web port input range: 1024 to 65535. If you want to visit your DVR from
internet, you must forward the ports used in the DVR network settings at the virtual server option of
your router.
1. Input the PORT (media port)
2. Input the WEB PORT (Must be different from
media PORT)
3. Enter the IP Address that you have reserved at
the beginning of this section into this field to be
the unique address of your DVR in your local
network
4. NETMASK: It is recommended to leave the
Subnet mask as the default 255.255.255.0.
5. Set the GATEWAY to the IP Address of your
router.
6. Set the DNS (Domain Name Server) Address
1. If your ISP provides you a Static IP Address, select
STATIC as the network TYPE.
2. Input the PORT (media port)
3. Input the WEB PORT (Must be different from media
PORT)
4. Enter your PPPoE NAME and PASSWORD so your
DVR will be able to obtain service from your ISP.
5. Enter the DNS (Domain Name Server) address.
6. You will need to apply for a Dynamic DNS (DDNS)
account and register a Domain Name with one of the
25