Casio IT-800 Series Quick Start Manual page 29

If EAP-TLS radio button in Authentication field is selected, tap the EAP-Properties button that
appears when selecting the EAP-TLS radio button to set the following settings.
Table 5.5
Parameters in
EAP-Properties screen
User name
Certificate
Domain
Validate server
certificate
3. Tap WLAN tab.
Figure 5.5
Table 5.6
Field / Radio
Buttons
Adapter power On
Off
Power save Enable
Disable
Standard b
b/g
RSSI Level for No roaming
initiating roaming
Default
High
Description
Input a user name in alphanumeric (maximum 100
alphanumeric).
Select a client certificate installed already (maximum
100 alphanumeric).
Search button in the field will display a list of
installed client certificates. Select one by highlighting
it.
Input in alphanumeric (maximum 100 alphanumeric) None
Set up the requisition for server certificate.
With check mark : certificate is required.
Without check mark : certificate is not required.
Enable power to the integrated WLAN module.
Disable power to the integrated WLAN module.
Enable power save mode for the WLAN module.
Disable power save mode for the WLAN module.
Set up IEEE802.11b standard effect.
Set up IEEE802.11b/g standard effect.
Set up "-100 dBm" for roaming starting threshold level,
a level where communication via WLAN is practically
impossible, so that roaming should not be carried out.
Set up "-78 dBm" for the roaming starting threshold
level.
Set up "-72 dBm" for roaming starting threshold level,
for faster (more frequent) roaming
29
Description
Default
None
None
Certificate is required.
Default
Yes
Yes
Yes
Yes