Connection Via Irda - Casio IT-800 Series Quick Start Manual

5.2 Connection via IrDA

If the PC has an IrDA interface, it is possible to connect the IT-800 to the PC via IrDA using
ActiveSync.
Follow the steps below:
1. Set the COM port used by ActiveSync on the PC to Infrared Port(IR).
2. Place the IT-800 so that the IrDA port located on the left side of the IT-800 faces with the IrDA
port on the PC. Communication can be established if the distance is between zero and
approximately 20cm.
3. On the IT-800, from Start menu, navigate to Programs → ActiveSync to start up
ActiveSync.
4. Tap Menu → Connect via IR.
Figure 5.2
26