Table of Contents
Advertisement
3.3.3
Installing the GPS and GSM / GPRS Modules
Follow the instructions to install these modules.
3.3.3.1
Install the GPS Module
1.
Insert the GPS module #1, into the 4-pin hole on the motherboard. Solder the
GPS module carefully to fix it in place.
2.
Fasten the cable between the connector on the GPS module and the screw the
antenna cable #2, into the antenna hole #3, on the rear cover.
3.
Screw the external antenna onto the antenna hole on the rear cover.
TREK-743 User Manual
GPS Module
1
Figure 3.3 GPS module
14
2
Antenna
3
Advertisement
Table of Contents
