4.3.2.2
Power off / Hard off Delay Setting
Pins 3 to pin 6 of JP3 determine the duration of the time delay before powering off /
hard off (5VSB off). The jumper provides four different settings. Refer to the chart
below for more detail. The delay time may be custom set by making an OEM request.
Table 4.5: Power off / Hard off Delay Setting (JP3)
Off delay
0 sec
5 sec (Default)
1 min
5 min
The power-off delay function is available in coordination with the ignition input power
control, as described in the previous section.
Hard off
5 sec
30 sec (Default)
5 min
15 min
25
Jumper setting
TREK-743 User Manual