Top Cowl Removal And Installation; Exterior Care - Mercury 25 EFI FourStroke User Manual

Top Cowl Removal and Installation

REMOVAL
1. Unlock the rear latch by pulling lever up.
2. Lift rear of cowl and disengage front hook.
INSTALLATION
1. Lower the top cowl over the engine. Bring the front of the
cowl down first and engage the front hook, then lower the
cowl into its seated position with the bottom cowl.
2. Apply some downward pressure on the bottom cowl and
then lock the cowl in place by pushing in the cowl latch.
Ensure the top cowl is securely fastened by pulling up on
the back of the cowl.

Exterior Care

Your outboard is protected with a durable baked enamel finish.
Clean and wax often using marine cleaners and waxes.
eng
MAINTENANCE
99
10190
10191