6. Coat the propeller shaft with Quicksilver or Mercury
Precision Lubricants Anti‑Corrosion Grease or 2‑4‑C with
PTFE.
Tube
Ref No.
94
95
7. Install front thrust hub, propeller, rear thrust hub washer and
propeller nut onto the shaft.
a
b
8. Place a block of wood between gearcase and propeller and
torque propeller nut to specification.
NOTE: If the propeller nut does not align with the propeller shaft
hole after tightening to the specified torque, then tighten the nut
further to align it with the hole.
eng
MAINTENANCE
Description
Anti-Corrosion
Grease
2-4-C with
PTFE
c
10087
Where Used
Propeller shaft
Propeller shaft
a -
d
b -
c -
d -
10077
107
Part No.
92-802867Q 1
92-802859A 1
Propeller nut
Rear thrust washer
Propeller
Forward thrust hub