Installation; Accessories - Sanyo VW-VF10BG Technical Data & Service Manual

Installation

1. Accessories

Part Name
Chain
Measuring spoon
I Read the "Safety Precautions" carefully before performing installation or electrical work, and perform the work
correctly.
I The precautions listed here are divided into WARNING and CAUTION categories. Both contain important
information related to safety. Be sure to observe them. The meaning of these indications is as explained below.
WARNING
Incorrect handling or use may result in death or serious injury to the user.
CAUTION
Incorrect handling or use may result in injury to the user, or in property damage.
G
After installation is completed, perform a test run and verify that there is no trouble. Also explain to the customer
how to use, clean, and maintain the product, as described in the Instruction Manual. Request that the customer
store this document ("For the Person in Charge of Installation") together with the Instruction Manual.
G The supplied two measuring spoons are provided for use in certain regions.
Store them in a safe place. For details, refer to the Instruction Manual.
G
Request installation and electrical work from the dealer or from a professional agent.
Attempting installation yourself, and doing so incorrectly, may result in water leakage, electric shock, fire, or
other accident.
G Perform installation work correctly, in accordance with this document ("For the Person in Charge of
Installation.") Incorrect installation may result in water leakage, electric shock, fire, or other accident.
G
A dedicated circuit is not required for electrical work, however supply power from a wall outlet that includes a
leakage breaker. (1ø AC 220 – 240 V)
Do not use extension cords or plug multiple electrical plugs into the same outlet. If the power cord does not
reach the outlet, change the installation location or add an additional outlet at a position that the power cord
will reach. Be sure to connect the ground wire. Insufficient power circuit capacity or incorrect electrical work
may result in electric shock or fire.
G
Insert the power plug securely, all the way to the base. Do not use a plug that is not fully inserted, or that is
damaged. Do not use a loose power outlet. Doing so may result in electric shock or in fire caused by heating.
G
Do not install outdoors, or in any location where rainwater may contact the system. Doing so may result in
electric shock or fire.
G
Rinse out the water tank every day and keep it clean. Then be sure to refill it with tap water. If you continue to
use the tank without cleaning it, dirt and water scale may decrease the performance of the unit, or may cause
the growth of mold or bacteria, resulting in odor.
G
Do not perform cleaning while the system is operating. Doing so may result in electric shock or injury.
G Be sure to unplug the power cord from the wall outlet before performing cleaning.
G After cleaning, be careful not to operate the system with the intake filter, front panel, outlet filter, or other
component removed. Doing so may result in system malfunction.
G
When unplugging the power cord, do not grasp the cord. Instead, be sure to grasp the power plug on the end
to pull out the plug.
G If the system will not be used for a long period of time, drain out the water and unplug the power cord. Drain
the water from the water tank and electrolyzed water tray, and in particular be sure to fully dry the Virus
Washer element. If the water is not fully drained from the system, the growth of mold or bacteria may result in
odor. For details, refer to the servicing technical materials, or else contact the dealer where the system was
purchased.
For the Person in Charge of Installation
VW-VF10BG
Figure
Safety Precautions
WARNING
CAUTION
7 - 2
Q'ty Remarks
2 For preventing unit tip-over
2 For measuring salt (1 g)
Installation
85464369020000
7