Sanyo VW-VF10BG Technical Data & Service Manual page 40

7
Disconnect the joint from the Visur Washer element.
Press on the stopper at the base of the joint while pulling
the joint upward to remove it.
Securely attach the removed joint to the new Virus Washer
element.
CAUTION
G
If the joint is not securely attached, water leakage will occur.
8
Install the Virus Washer element.
Follow the procedure for removal in the reverse order.
When attaching the tube to the joint, insert the tube all
the way until the end of the tube makes contact.
Pull on the tube and verify that it does not disconnect.
6
6 - 4
Maintenance Procedures
Joint
Stopper