Replacing The Room Temperature Sensor - Sanyo VW-VF10BG Technical Data & Service Manual

6. Replacing the room temperature sensor

1 Perform steps
2 Disconnect the room temperature sensor cord from the cord clip, then cut the binding bands (2) inside the
electrical component box, and disconnect the room temperature sensor connector.
Room temperature sensor connector (TA)
3
Remove the sensor installation bracket (2 screws).
Disconnect the room temperature sensor cord from the cord clips (4 locations).
Room temperature
sensor
Sensor installation
bracket
6
4
Remove the screw (1) from the wiring installation band, and remove the room temperature sensor.
1 – 3 from "Replacing the fan motor."
Screws
Sensor installation
bracket
Cord clips
Room temperature
sensor cord
Wiring installation band
Screw
6 - 10
Maintenance Procedures
Binding bands
Cord clip
Binding bands
Cord clip
Room temperature
sensor cord