Cleaning The Electrolyzed Water Tray; Cleaning The Water Receptacle - Sanyo VW-VF10BG Technical Data & Service Manual

8. Cleaning the electrolyzed water tray

1 Stop the system and unplug the power cord.
2 Remove the water tank.
3 Remove the front upper panel, then remove the divider panel A (4 screws).
4
Remove the scale filters. Use a brush or similar tool to clean the
electrolyzed water tray, then rinse it off with water.
5 Rinse the scale filters with water.
6
Plug the power cord and press the ON/OFF button.
7 Press the DRAIN/DRY button to drain the water to the
drainage tank
8 Empty the
drainage tank.

9. Cleaning the water receptacle

1
Stop the system and unplug the power cord.
6
2
Remove the water tank, then remove the scale filters.
3 Perform steps
4 Use a brush or similar tool to clean the water receptacle and remove scale, then rinse with water.
Press the DRAIN/DRY button to drain the water to the drainage tank.
5 Plug the power cord and press the ON/OFF button.
6
Press the DRAIN/DRY button to drain the water to the drainage tank.
7 Empty the
drainage tank.
DRAIN/DRY
button
Water
receptacle
Scale filters
Electrolyzed
water tray
Divider panel A
1 6
– from "Replacing the Virus Washer element." Then remove the Virus Washer element.
DRAIN/DRY button
DRAIN/DRY
button
Water
receptacle
Scale filters
6 - 12
Maintenance Procedures
Water tank
Insert facing
in this direction.
(Down)
Scale filters