Important Information - Sanyo VW-VF10BG Technical Data & Service Manual

Do not place any containers that
contain liquid on top of the
system.
Doing so may result in system
malfunction.
Be sure to securely reinstall all
components after cleaning.
Using the unit without the water tank, filter, or
other component securely installed
may result in system malfunction.
Install the system indoors, and
use in an environment between
5°C and 35°C.
In a particularly cold environment, the freeze-
prevention function may be
activated, and the unit may not
operate even when the power
switch is turned ON.
Do not install in a location
exposed to dripping water.
Doing so may result in system malfunction.
When relocating or storing the product (if it will
not be used for a long period of time), drain the
electrolyzed water and dry the air purification
element.
Be sure to use normal tap
(drinking) water.
Never use water from a water purifier, water
from a water heater, alkali ion water, mineral
water, well water, seawater, or other types of
water. These types of water cannot be
electrolyzed and can cause the growth of
mold or bacteria, resulting in odor.
Perform regular cleaning.
Follow the instructions under "Cleaning the
System," in order to clean and maintain the
unit.
If the unit becomes especially dirty, mold may
grow, resulting in odor.
CAUTION
Do not perform cleaning while the
system is operating.
Doing so may result in electric shock or
injury.
Prohibited
Grasp the power plug when
unplugging the power cord.
When unplugging the power cord, do not
grasp the cord. Instead, be sure to grasp the
power plug at the end of the cord
and pull out the plug. Unplugging
the cord incorrectly may result in
Required electric shock, short circuit, or fire.
Do not use the system with the
filter removed.
Dust entering into the system may cause
system malfunction.
Required
Avoid installation in high
locations. Install in a flat and
stable location.
Observe this precaution in order to ensure
that the system functions correctly.
Failure to do so may result in the
unit tipping over due to earthquake
or contact by persons.
Prohibited
Required

IMPORTANT INFORMATION

The electrolysis condition must
be set correctly according to the
water quality in the region where
the product is used.
For details, refer to "Setting the electrolysis
condition."
Do not direct the discharged air
directly onto walls or furniture.
Do not allow the discharged air to directly
contact walls or furniture.
It may damage the walls or furniture, resulting
in stains.
Do not obstruct the outlet.
Do not obstruct the air outlet with a curtain,
towel, or other item.
Doing so may result in system malfunction.
Prohibited
Do not place any items on the
unit.
Do not climb onto the unit.
Doing so may result in system
malfunction, or in the unit tipping
over.
Required
Install in a location where there is
little humidity, oil mist, or other
airborne substance.
Select a location for use that is free of
humidity, dust, oil smoke (oil particles
generated from cooking), and salt.
Failure to do so may result in
odors or in system malfunction.
Required
Secure space of 10 cm or more at
the left and right sides of the unit.
Also, allow servicing space of 100 cm or
more above and to the front of the unit.
Failure to do so may result in
system malfunction.
Required
This system is not able to break down or remove
toxic gasses and substances.
Be sure to open a window or otherwise ventilate
the interior of the room if a release occurs.
If the system is used for a long period in a
small room, open a window and ventilate
the room as necessary.
Do not unplug the power cord,
even if the unit will not be used
for a while.
Even when the unit is stopped, cleaning
inside the system is performed automatically.
Check that there is water in the water tank,
and do not unplug the power cord.
Be careful of freezing.
Freezing may result in system malfunction
and damage.
ii
Prohibited
Prohibited
Required
Required
Required