Call Waiting On The Cell Line - AT&T TL96371 User Manual

Telephone operation
Make, answer and end a call
Using the telephone base:
To make a cell call:
1. Press CELLULAR, then enter the telephone number.
DIAL
2. Press .
To predial a cell call:
• Enter the telephone number, then press
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls. If you have two cell phones
connected to the telephone base, the telephone system prompts you to select
a cell phone before you make a cell call.
To answer or end a cell call:
CELLULAR.
• Press
NOTES:
• You can also use your cell phone to answer the call. If you answer with your cell phone,
it disconnects from the telephone base.
• If you do not want to answer the call, press
and then returns to the idle mode.
• When you try to make a cell call but your cell phone is not connected to the base, the
telephone base displays Cellular phone not connected. Press
your cell phone to the telephone system. Refer to Bluetooth connection from idle
mode on page 22 and Connect/disconnect an active device on page 23.

Call waiting on the cell line

If you subscribe to call waiting service from your cell phone service provider,
and someone calls while you are already on a call, you hear a beep.
Using a handset:
• Press CELLULAR on the handset to put your current call on hold and
take the new call.
CELLULAR on the handset at any time to switch back and forth
• Press
between calls.
-OR-
Press SWAP
to highlight Swap, then press
Using the telephone base:
• Press SWAP
you take the new call.
• Press OPTION
Swap. Press
call is put on hold.
to switch. To switch back, press
on the telephone base. The original call is put on hold and
on the telephone base.
SELECT to resume the original call. The other incoming cell
CELLULAR.
REJECT
OPTION
SELECT .
Press CID
48
. The screen displays Call rejected
CONNECT
. Press CID
or DIR to highlight
to connect
or DIR