AT&T TL96371 User Manual page 69

Multiple handset use
Intercom
Using the telephone base:
1. Press MENU
2. Press CID or DIR to highlight Intercom, then
press SELECT
• The telephone base displays INTERCOM and a list
of registered handsets.
– Press CID or DIR to highlight a destination
handset or All handsets, and then press
-OR-
Press 1-9 for handset 1-9,
–
handset 10,
handset 12.
-OR-
TONE
– Press
The telephone base displays Calling HANDSET X, or Calling all handsets.
The destination handset(s) rings and displays BASE 0 is calling.
To answer an intercom call at the destination device:
HOME/
• Press
HOME on the telephone base. Both screens show Intercom.
To silence an intercom call:
OFF/
• Press
handset, or press MUTE or
displays Ringer muted for a few seconds.
To mute while on an intercom call:
• Press MUTE/
screen displays Microphone off for a few seconds.
To end an intercom call at the destination handset:
• Press OFF/
base or charger. Both screens display Intercom ended.
To end an intercom call at the telephone base:
• Press END or CANCEL. Both screens display Intercom ended.
NOTES:
• You can cancel the intercom call before it is answered by pressing CANCEL or
the telephone base, or pressing
• If you are calling all devices, only the first handset to pick up can answer the intercom call.
• If the destination device does not answer the intercom call within 100 seconds, or if it
is in use, on a call or out of range, the initiating device displays No answer. Try again.
on the telephone base in idle mode.
.
TONE
and
and then # (pound key) to call all handsets.
/SPEAKER on the destination handset, or press
or
FLASH
, MUTE/
CANCEL
SILENCE
on the handset, or MUTE on the telephone base. The
DELETE
, END or place either handset back in the telephone
CANCEL
TONE 0 for
and
1 for handset 11, or
SILENCE
or
DELETE
on the telephone base. The screen
OFF/ or END
CANCEL
63
Answering sys
Directory
Cal ler ID log
Intercom
BACK
Handset
SELECT .
Handset
Al l handsets
BACK
TONE
and
on the destination
on your originating handset.
SELECT
INTERCOM
2
3
SELECT
2 for
END on