Call Waiting On The Cell Line - AT&T TL96273 Complete User's Manual

Telephone operation
Telephone operation
To answer a cell call:
Press HOME,
To end a cell call:
CELL 1 or
Press
NOTES:
• You can also use your cell phone to answer the call. If you answer with your cell phone, it
disconnects from the telephone base.
• If you do not want to answer the call, press REJECT.
• When you try to make a cell call but your cell phone is not connected to the base, the
telephone base displays Cellular phone not connected. Please connect to proceed. Refer to
Bluetooth connection from idle mode on page 22 and Connect/disconnect an active device
on page 23.

Call waiting on the cell line

If you subscribe to call waiting service from your cell phone service provider,
you hear a beep if someone calls while you are already on a call.
Using a cordless handset:
• Press CELL 1 or
new call.
CELL 1 or
• Press
between calls.
-OR-
• Press SWAP
Using the telephone base:
• Press SWAP
you take the new call.
• To switch back, press
DIR to highlight Swap Cell 1 or Swap Cell 2.
the original call. The other incoming cell call is put on hold.
CELL 1, CELL 2
CELL 2.
CELL 2
CELL 2
to switch. To switch back, press
on the telephone base. The original call is put on hold and
OPTION
or any dialing key (0-9
to put your current call on hold and take the
at any time to switch back and forth
on the telephone base.
48
or TONE
CELL 1 or CELL 2.
Press CID
Press SELECT
).
or
to resume