Loading Documents; Making Copies - Xerox WorkCentre 5945 Quick Start Manual

Multifunction printer
Hide thumbs Also See for WorkCentre 5945:
Table of Contents

Advertisement

Getting Started
4. To re-activate the device when in Low Power or Sleep mode, press the Power button. The device
takes longer to recover from Sleep mode.
Note:
If there are any pages in the document feeder input tray when the device powers on or exits
power save mode you will be prompted to reload the documents.

Loading Documents

Original documents can be loaded either into the document feeder or onto the document glass.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
Note:
Original documents are only scanned once even when several copies are selected or 2-sided
originals are inserted into the document feeder.

Making Copies

When you press the Start button to make a copy, the device scans your originals and temporarily
stores the images. It then prints the images based on the selections made.
30
®
WorkCentre
XXXX
User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5955

Table of Contents