Xerox WorkCentre 5945 Quick Start Manual page 32

Getting Started
1. Press the Power button on the control panel.
2. Select the Power Off button on the touch screen.
3. Select the Power Off button again to confirm that the device should power off.
Note: Confirming power off will result in the deletion of any jobs currently in the queue. If
Cancel is selected the power off option will be cancelled, the device will be available for use and
any jobs currently in the queue will be retained.
The device will begin a controlled power down sequence. It remains on for approximately 36
seconds before switching off.
Using the Energy Saver Option
Energy Saver ends the current session and keeps the device running on low power. When in Energy
Saver Mode, press the Power button to wake up the device.
1. Press the Power button on the control panel.
2. Select the Energy Saver button on the touch screen.
3. Select the Energy Saver button again to confirm that the device should go into the Energy
Saver state.
Note: When Energy Saver mode is confirmed the device will immediately enter Low Power
mode. If Sleep mode has been configured, the device will then enter Sleep mode after a
specified period of time.
Note: The Power button is illuminated when the device is in the Energy Saver state. A steady
light indicates the device is in Low Power mode. A flashing light indicates the device is in Sleep
mode.
User Guide
®
WorkCentre XXXX
29