Table of Contents
Advertisement
6. SOURCE CONNECTIONS
Overview
•
Input Locations
•
RGB Analog Source to Port 3
•
RGB Analog Source with Composite Sync to Port 4/5
•
Component Video Source to Port 4/5
•
RGB Analog Source with Tri Level Sync to Port 4/5 (Optional)
•
Component Video Source with Tri Level Sync to Port 4/5 (Optional)
•
RS232 Connection
•
Communication Port for Communication With Peripherals
6.1 Input Locations
Input Facilities
•
RGBS or RG
B
S
•
RGB3S or RG
3S
•
(R-Y)Y(B-Y)S or (R-Y)Y
•
(R-Y)Y(B-Y)3S or (R-Y)Y
OFF
ON
POWER MAINS
Image 6-1
Input Facilities
Which source to which input
This table gives an overview of the relation between Input Port #, Source Type and Selection Keys on the RCU:
Input Port #
1
2
3
4/5
4/5
4/5
4/5
Table 6-1
Input Port #, Source type and Selection Keys on the RCU
6.2 RGB Analog Source to Port 3
Which signal to Port 3?
Connect your RGB source with sync on green, composite or separate sync via an interface to Port 3. Always use an interface (e.g.
Barco Magik Interface R9828120) when a computer and local monitor have to be connected to the projector as the signal cable
1. Input signal : R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate hor and vert. sync) or sync on green (composite sync).
2. Input signal : R-Y, Y and B-Y with separate composite sync or with separate hor and vert. sync or with composite sync on Y.
3. Input signal : R, G and B with separate tri level sync or with tri level sync on green.
4. Input signal : R-Y, Y and B-Y with separate tri level sync or with composite tri level sync.
R5976257 BARCO REALITY 909 15/03/2003
B
(B-Y) [Component Input]
S
(B-Y) [Component Input]
3S
See installation instructions before connecting to the supply.
Voir la notice d' installation avont de raccorder au r éseau.
R
800 periphals
PORT 3
COMM. PORT
Source Type
For future expansion
For future expansion
1
RGB
1
RGB
2
Component video
RGB with tri level sync
Component video with tri level sync
G
B
DEFOCUS
Comp / H-Sync V-Sync
PORT 4 / 5
PORT 2
3
4
6. Source Connections
X-POS Y-POS
OFF - ON
OFF - ON
green: operation
red: standby
75 Ohm
75 Ohm
PORT 1
PROJECTOR MODE
Selection Keys on the RCU
—
—
3
4 or 5
6
7
8
27
Advertisement
Table of Contents
