Installing The Lp Pressure Regulator - Mendota DXV-45 DT3-LX Operating Instructions Manual

INSTALLING THE LP PRESSURE REGULATOR

WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS PACKAGED WITH LP PRESSURE REGULATOR BODY
BEFORE YOU ATTEMPT THE CONVERSION. FAILURE TO FOLLOW ALL INSTRUCTIONS WILL RESULT IN A LEAK
OR OVERFIRING OF THE APPLIANCE AND CAN LEAD TO AN EXPLOSION OR A FIRE HAZARD.
1. Remove the Courtesy Access Panel mounted behind the lower grill and lay down gently without disconnecting
any wires of internal components. WARNING: DO NOT FORCE. EXCESSIVE FORCE MAY DAMAGE
INTERNAL WIRING COMPONENTS!
2. Follow Instructions given below directly from SIT Controls. Replace Extension Knob as the final step.
47