To Turn On The Appliance - Mendota DXV-45 DT3-LX Operating Instructions Manual

REMOTE TRANSMITTER OPERATING INSTRUCTIONS

TO TURN ON THE APPLIANCE:

1. Press the ON/OFF button. The transmitter display will show all active icons on the screen.
2. Select the Thermostat Mode by pressing the Thermostat Key: OFF (meaning Manual
Mode), ON (meaning normal Thermostat) or Smart (meaning Smart Mode).
a. In OFF (Manual Mode), the appliance will ignite and start on HI.
b. In ON (Normal Thermostat Mode), the appliance will only ignite if the Set Temperature
is greater than the Room Temperature.
c. In SMART (Smart Mode), the appliance will only ignite if the Set Temperature is greater
than the Room Temperature.
TO TURN OFF THE APPLIANCE, press the ON/OFF button.
MODE KEY
Pressing the MODE KEY toggles between the various availa-
ble functions: Flame Height, Fan Speed, Aux (Accent Light)
On/Off and Secondary Burner On/Off.
Flame Height: 6 flame height Levels are available. While the Flame
Height Icon is displayed, pressing the Up or Down button
once will increase or decrease the flame height by 1 of 6
increments. If the flame height is at Level 1 and the Down
button is pressed, all burners will turn OFF. If in IPI mode,
the pilot light will also extinguish. If in Standing Pilot Mode,
the pilot light will remain ON. Note: If in SMART model, the
flame height function is not available for manual adjustment.
In SMART mode, the flame height regulates automatically.
Fan Speed Control: The fan speed can be adjusted through six (6) speeds
and OFF. To activate this function, press the MODE Key to in-
dex to the fan control icon. Use the UP/Down Arrow Key to turn
ON, OFF or adjust the fan speed. A single "beep" will confirm
reception of the command.
Aux (Accent-Light): This function controls the Mendota Accent Light func-
tion. Pressing the UP key in this mode will TURN ON the Ac-
cent Light and Pressing the DOWN key will TURN OFF the
Accent Light. A single "beep" will confirm reception of the
command. Note: The Accent Light Dimmer control is located
adjacent to the Remote Receiver. Turn the Dimmer Control Knob to dim or
brighten the Accent Light. Once you set your desired brightness level, you
may use the AUX function to turn the Accent Light On or Off at that preset
level.
Secondary Burner: This function controls the Secondary Burner's ON/OFF fea-
ture. Pressing the UP Key in this mode will TURN ON the Second-
ary Burner and Pressing the DOWN Key will TURN OFF the Sec-
ondary Burner. The flame level will not change when you turn the
Secondary Burner On or Off. The flame level can only be changed
in the Flame Level mode.
35