Displaying From A Mac Laptop; Solutions When "Not Supported" Message Appears; Solutions When Only A Partial Image Appears - Epson PowerLite Pro Cinema LS9600e User Manual

Parent topic:

Displaying From a Mac Laptop

If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop
for mirrored display. (See your laptop manual for details.)
1. Open the System Preferences utility and select Displays.
2. Click the Arrangement tab.
3. Select the Mirror Displays checkbox.
Parent topic:

Solutions When "Not Supported" Message Appears

If the "Not Supported" message appears, try the following solutions:
• Make sure the correct input signal is selected on the Settings menu.
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency
limit. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)
• As a test, try setting the computer's display resolution to the lowest possible setting, and then
gradually increase it as necessary.
Parent topic:
Related references
Projector Feature Settings - Settings Menu

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:
• Press the Aspect button on the remote control to select a different image aspect ratio.
• Check the cables connecting the computer or video source to the projector. Try connecting different
cables.
• Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
• Check the resolution assigned to your presentation files to see if they are created for a different
resolution than you are projecting in. (See your software help for details.)
Parent topic:
Solutions When "No Signal" Message Appears
Solutions When "No Signal" Message Appears
Solving Image Problems
Solving Image Problems
134