Epson PowerLite Pro Cinema LS9600e User Manual page 46

1. Make sure the projector is turned on.
2. Start your web browser on a computer or device connected to the network.
3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
Note: If you connect from a web browser on a smartphone or tablet, a screen with two options is
displayed. Select remote to display the Web Remote page, or select config to display the Web
Control page.
You see the Web Control screen.
Note: You may need to log in before you see the Web Control screen. If you see a log in window,
enter your user name and password. (The default user name is EPSONWEB and the default
password is admin.)
4. To select projector menu settings, select the name of the menu and follow the on-screen
instructions.
5. To control projection remotely, select the Web Remote option.
46