Switching WirelessHD Sources
If you have connected multiple HDMI input sources to your WirelessHD transmitter, you can use the
projector remote control to switch between sources.
1. Aim the remote control at the WirelessHD transmitter.
2. Press the Input button on the remote control or the WirelessHD transmitter.
You see this screen:
3. Press the Input button repeatedly to highlight different input sources.
4. When you have highlighted the source you want to switch to, release the Input button.
After a few seconds, the display switches to the highlighted source.
Parent topic:
Using WirelessHD
93