Table of Contents
Advertisement
1. Turn on the projector and display an image.
2. Adjust the focus, zoom, and lens shift settings.
3. Press the Menu button.
Note: You can also press the Memory button on the remote control to access the Memory menu
directly.
4. Select the Memory menu and press Enter.
You see this screen:
5. Select one of the following options:
• Load Lens Position: Overwrites your current settings with saved settings
Note: You can load the saved settings from Memory1 or Memory2 by pressing the Lens1 or
Lens2 buttons on the remote control.
• Save Lens Position: Saves your current settings to memory (10 memories with different names
are available)
Note: A memory name that has already been used is indicated by a green mark. Saving over a
previously saved memory overwrites the settings with your current settings.
84
Advertisement
Table of Contents
