Changing The Super-Resolution/4K Enhancement Setting - Epson PowerLite Pro Cinema LS9600e User Manual

2. Press the Super Res button on the remote control.
Note: You can also set the Super-resolution setting from the Signal menu.
A list of the setting values appears. Higher values increase the intensity of the effect.
3. Press the left or right arrow buttons on the projector's remote control to adjust the setting.
4. Press Menu or Esc to exit the menus.
Parent topic:
Related references
Input Signal Settings - Signal Menu

Changing the Super-resolution/4K Enhancement Setting

You can set the strength of the Super-resolution/4K setting (PowerLite Pro Cinema LS10000).
If you select a Super-resolution value of 1 to 5, you can sharpen blurred images and enhance the
apparent detail of an image by increasing the resolution of the image signal.
If you select a 4K Enhancement value of 4K-1 to 4k-5, you can display 4K images (3840 × 2160) using
4K Enhancement Technology with super resolution processing and create ultra high-definition images.
Note: You cannot use Super-resolution when converting 2D images to 3D images, or when a computer
image is displayed. When projecting 3D images, you can use Super-resolution only with
1080p/24 Hz/frame packing signals. You cannot use 4K Enhancement when projecting 3D images.
1. Turn on the projector and switch to the image source you want to use.
Using Basic Projector Features
76