Table of Contents
Advertisement
Laser Safety Information
This projector is a Class 2 laser product that complies with the IEC60825-1 international standard for
lasers. Follow these safety instructions when using the projector.
• If an error occurs in the projector, turn off the power and unplug the projector immediately. Continuing
to use the projector could result in an electric shock, fire, or visual impairment. Contact Epson support.
• Do not attempt to dissassemble or modify the projector. The projector contains a high-power laser
component. Serious injury could result.
• Do not look into the lens during projection. Also, do not look into the lens using optical devices, such
as a magnifying glass or telescope. This could cause visual impairment.
• When turning on the projector at a distance using the remote control, make sure no one is looking into
the lens.
• Do not allow small children to operate the projector. Children must be accompanied by an adult.
• Do not apply optical devices, such as a magnifying glass or reflector, to the projected image. Using the
projector may result in physical harm, fire, or an accident.
• Before using the projector, make sure there is nothing in the area that could reflect the projected
image.
• When disposing of the projector, do not disassemble it. Dispose of the projector in accordance with
your local or national laws and regulations.
There is a label attached to the projector to indicate it is a Class 2 product. The label contains the
following information:
• Invisible laser radiation
• Do not stare into beam or view directly with optical instruments
• Class 2 laser product
• Pulse width
Laser Optical Path
Parent topic:
Notices
153
Advertisement
Table of Contents
