Table of Contents
Advertisement
Fig 02-03
DON'T OVERTIGHTEN AS THE
GUARD IS ONLY PLASTIC!
It is strongly recommended that you mount the
machine to a workbench or to a purpose built scroll
saw stand. A pad between the saw and the
workbench/stand is also recommended to reduce
vibration. Ensure you use flat washers between
the bolt head and mounting holes, see figs 04-05-06.
NOTE: Fretsaw Stand Only. You may need to add
a larger sub-table (MDF or Plywood plate) to give
extra support to larger models.
Fig 04
SCROLL SAW
B
NOTE: The guard can be adjusted by loosening
the two butterfly knobs (C) and sliding the guard
assembly (B) up or down to accommodate different
timber thicknesses.
Mounting the Scroll Saw
Mounting Holes
7
Initial Assembly
C
Fig 05-06
Advertisement
Table of Contents
