Axminster RSS16E Hobby Series User Instruction page 13

Fig 12-13
Blade
Fig 14-15
Adjusting screw
Pointer
Setting Up the Saw/ Operating Instructions
Engineer's square
B
Scale
13
NOTE: If you are new to scroll saws, there will be
a learning period, a period to learn the saw itself,
and a period to learn how the wood and saw work
together.
Expect some blade breakages, scroll saw blades
are fairly fragile, compared to blades found on a
bandsaw.
WARNING! UNDER NO
CIRCUMSTANCES SHOULD
CHILDREN BE ALLOWED IN
WORK AREAS.
CHECK THAT EVERYTHING IS SECURE,
THAT THE BLADE IS TIGHT AND ALL
NON ESSENTIAL ITEMS HAVE BEEN
CLEARED AWAY FROM THE WORK
AREA. CONNECT A DUST EXTRACTION
UNIT TO THE DUST EXTRACTION
OUTLET ON THE SCROLL SAW.
SEE THE SYMBOLS ON PAGE TWO
FOR WEARING THE CORRECT SAFETY
PROTECTION WHEN USING THIS
MACHINE.
PLUG IN AND SWITCH ON
THE MAINS
1) Before turning on the scroll saw make sure the
variable speed control is turned down low, see fig 16.
Fig 16
Continues Over...