Maintenance
Fig 39-40-41
Rocker arm
Motor assembly
Base plate
2) An occasional light coat of oil on the table to
prevent surface rust is recommended.
3) Occasionally wipe the machine over with a damp
cloth.
4) If the scroll saw is not going to be used for a period
of time, smear a light coat of oil over the work table
and place a dust sheet over the saw.
Lower blade holder
Dust extraction outlet
Rocker Arm Bearing Bushes
After a period of use it is recommended to lightly oil
the upper and lower rocker arm bearings, see fig 42.
Bearing bushes
20
Fig 42