Clean The Phone Display; Clean The Phone Touchscreen Display; Adjust Handset Rest - Cisco Unified 8961 User Manual

Features of Your Cisco Unified IP Phone

Clean the Phone Display

Phone displays that are not touchscreens can be easily cleaned.
Procedure
Wipe the screen with a soft, dry cloth.
Caution

Clean the Phone Touchscreen Display

When the phone has a touchscreen, the touchscreen needs to be inactive before you clean the display.
Use only a soft, dry cloth to wipe the phone display. Do not use any liquids or powders on the phone
Caution
because they can contaminate phone components and cause failures.
Procedure
Step 1 If the phone is in sleep mode, press Select so that the phone wakes up.
Step 2 Press and hold Select until you see the message Touchscreen Disabled to disable the phone screen.
The phone screen reenables automatically after 60 seconds.
Step 3
Clean the display using a soft, dry cloth.
Step 4 To reenable the phone screen manually after cleaning, press Select until you see the message Touchscreen
Enabled.

Adjust Handset Rest

If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the receiver does not
slip out of the cradle.
Use only a soft, dry cloth to wipe the phone display. Do not use any liquids or powders on the
phone because they can contaminate phone components and cause failures.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
Clean the Phone Display
31