Set Divert Target; Enable Callplane Overwrite - Cisco Unified 8961 User Manual

Assistant Phones
Softkey
StpUpdt/StrUpdat
Back
LogOut

Set Divert Target

Procedure
Step 1 Open the Assistant Manager Status menu.
You may need to log in first.
Step 2 Press AsstSett.
If AsstSett is not visible, press More. You may need to press More twice.
Step 3
Press Set Divert Target.
Step 4 Enter the directory number.
Step 5 Press Save.
Pressing Redirect routes incoming, connected or on-hold calls to this number.
Related Topics
Log In to IPMA Service on Phone, on page 45
Assistant Settings Menu, on page 41

Enable CallPlane Overwrite

Procedure
Step 1 Open the Assistant Manager Status menu.
You may need to log in first.
Step 2 Press AsstSett to open the Assistant Settings Menu.
If AsstSett is not visible, press More. You may need to press More twice.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
42
Description
Stops or starts automatic refresh of a manager's status in the Assistant Manager
Status window. By default this is enabled (StrUpdat). To prevent automatic
refresh, press StpUpdt. Press StrUpdt to start automatic refresh.
Exits the Assistant Settings menu and returns to the Assistant Manager Status
window.
Logs out the assistant from the IPMA service. To resume using IPMA, the assistant
must log back into the IPMA service.
Applications