Dmx Address; Show Mode; Dimmer Mode - ADJ INNO ROLL HP User Instructions

Inno Roll HP
MENU
ADJ Products, LLC - www.adj.com - Inno Roll HP Instruction Manual Page 8
System Menu
001

DMX Address

512
Show 0

Show Mode

Show 12
Stage

Dimmer Mode

TV
Architec
Theatre
Slave 1
Slave Mode
Slave 2
No
Split Color
Yes
Dimmer Limit
100
On
Sound Mode
Off
0
Sound Sense
100
DMX State
Blackout
Last State
On
Back Light
Off
Normal
Pan Invert
Auto Test
Fixture Temp.
Function Hours
Software Version
Yes
Defaults
No
Reset
Inno Roll HP
System Menu: When making adjustments press ENTER to
confirm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
DMX Address
- Set the DMX Address -
1. Press the MENU button until "DMX Addresss" is displayed,
press ENTER.
2. "X" will now be displayed, "X" represents the displayed
address. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm, and then press and hold the MENU
button for at least three seconds to assign.
Show Mode
- Show modes 0 - 12 (Factory Shows).
1. Press the MENU button until "Show Mode" is displayed, press
ENTER.
2. "Show X" will now be displayed, "X" representing a number
between 0-12. Programs 1-12 are factory programs, while "Show
0" is random mode. Press the UP or DOWN buttons to find your
desired show and press ENTER to select your show.
Dimmer Mode
- In this mode you can select the dimmer
curve.
1. Press the MENU button until "Dimmer Mode" is displayed,
press ENTER.
2. The current dimmer curve setting will be displayed.
3. Press the UP or DOWN buttons to find your desired dimmer
curve and press ENTER to confirm. See the Dimmer Curve Chart
on page 20.
ADJ Products, LLC - www.adj.com - Inno Roll HP Instruction Manual Page 9
System Menu