Dmx Address; Channel Mode - ADJ THEATRIX PRO 48 LED User Instructions

Theatrix PRO 48 LED System Menu Theatrix PRO 48 LED System Menu
On-Board System Menu.
The Theatrix PRO 48 LED comes with an
easy to navigate system menu. This next section will detail the func-
tions of each command in the system menu. Please read the next
section thoroughly!
To access the main menu press the MENU button. Tap the UP or DOWN
buttons until you reach function you wish to change. When you reach
the function you wish to change press the ENTER button. When a func-
tion is selected use the UP or DOWN buttons to change the function
settings. Once your changes are made press the ENTER button, and
then press and hold the MENU button for at least three seconds to lock
the change into the system memory. If the MENU button is not pressed
and held within eight seconds the fixture will automatically lock the
change into the system memory. To exit without making any changes
press the MENU button.

DMX Address

- Set the DMX Address -
1. Tap the MENU button until "DMX Addresss" is displayed, press
ENTER.
2. "X" will now be displayed, "X" represents the displayed address.
Press the UP or DOWN buttons to find your desired address.
3. Press ENTER to confirm, and then press and hold the MENU
button to assign.
for at least three seconds

Channel Mode

- This will let you select your desired
DMX Channel mode.
1. Tap the MENU button until "Channel Mode" is displayed, press
ENTER.
2. "X Chan" will now be displayed, "X" represents the displayed
DMX channel mode. Press the UP or DOWN buttons to find your
desired Channel mode.
3. Press ENTER, and then press and hold the MODE button
for at
to confirm.
least three seconds
American DJ Supply - www.americandj.com - Theatrix PRO 48 LED User Manual Page 7 American DJ Supply - www.americandj.com - Theatrix PRO 48 LED User Manual Page 8
© ® © ®