Table of Contents
Advertisement
Inno Roll HP
To enter the offset adjustment submenu, press the ENTER button for
at least 5 seconds. In this submenu you are able to adjust the original
position of the pan, gobo wheel, and color wheel.
Pan Offset
- Adjustment of the Pan position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Pan Offset" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Color Offset
- Adjustment of the color wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Color Offset" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Gobo Offset
- Adjustment of the gobo wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Gobo Offset" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
ADJ Products, LLC - www.adj.com - Inno Roll HP Instruction Manual Page 14
Color & Gobo Adjustment
Inno Roll HP
Operating Modes: The Inno Roll HP can operate in three dif-
ferent modes. In each mode you can run the fixture as a stand
alone fixture or in a master/slave confiugration. This next sec-
tion will detail the differences in the operating modes.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• Show mode -
The fixture will run one of 12 shows.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
Designer.
™
Universal DMX Control:
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Inno Roll HP is an nine DMX channel DMX fixture. See
pages 18-20 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 9 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until "Sound Mode" is displayed, and
press ENTER. Press the UP or DOWN buttons so that "ON"
is displayed and press ENTER.
2. The sound sensitivity can be adjusted by pressing the MENU
button until "Sound Sense" is displayed. Press ENTER and use
the UP and DOWN buttons to adjust the sound sensitivity. "0"
ADJ Products, LLC - www.adj.com - Inno Roll HP Instruction Manual Page 15
This function allows you to use a Elation
Operation
Show
®
®
Advertisement
Table of Contents
