How To Add Components To Your Limited Configuration Server; Test The Current Configuration; Adding Components To The Server - Sun Microsystems Sun Fire X4450 Configuration Manual

How to Add Components to Your
Limited Configuration Server

Test the Current Configuration

Always test the current configuration before upgrading the server.
Testing the Current Configuration
Ensure that all internal components are properly seated and install the
1
cover.
Boot the server using the server's Tools and Drivers CD/DVD.
2
The server should pass POST and boot to the Tools and Drivers
3
CD/DVD's main menu.
Troubleshoot any front panel fault indicators before customizing the
4
server.

Adding Components to the Server

The component installation procedures in this document contain important
installation and validation information that can assist you in successfully
configuring the server.
1