1
Introduction
1.1
General information
•
Service and maintenance work must be carried out taking this service manual into account.
•
It is imperative that you observe safety information.
•
Information about operation or about general maintenance and care work on the mobility
device should be taken from the operating manual.
•
You can find information about ordering spare parts in the spare parts catalogue.
•
Only use original Invacare® spare parts. The guarantee will become invalid if other spare parts
are used!
•
We reserve the right to make any alterations on the grounds of technical improvements.
•
The mobility device may only be maintained and overhauled by qualified personnel.
•
The minimum requirement for service technicians is suitable training, such as in the cycle or
orthopaedic mechanics fields, or sufficiently long-term job experience.
- Experience in the use of electrical measuring equipment (multimeters) is also a requirement.
- Special Invacare training is recommended.
•
Alterations to the mobility device which occur as a result of incorrectly or improperly executed
maintenance or overhaul work lead to the exclusion of all liability on the side of INVACARE.
•
If you have any problems or questions please contact Invacare Service.
•
1.2
Notes on transport
•
If the mobility device has to be shipped back to the manufacturer for major repairs, you should
always use the original packaging for transport.
•
You must include a precise fault description.
1.3
Important symbols in this manual
WARNING!
This symbol warns you of danger!
• Always follow the instructions to avoid injury to the user or damage to the product!
EXPLOSION HAZARD!
This symbol warns you of an explosion hazard, which can be caused by excessive tyre
pressure in a pneumatic tyre!
• Always follow the instructions to avoid injury to the user or damage to the product!
BURN HAZARD!
This symbol warns against chemical burns, for example due to the discharge of battery
acids!
• Always follow the instructions to avoid injury to the user or damage to the product!
NOTE:
This symbol identifies general information which is intended to simplify working with your product
and which refers to special functions.