Invacare Bora Service Manual page 32

• Remove the terminal cover from the battery
terminals (1).
• Loosen the battery terminal clamps (1) with the
Phillips screwdriver.
• First undo the screw on the negative terminal
(black cable) with the Phillips screwdriver.
• After this, undo the bolt on the positive terminal
(red cable).
•
Reassembly of the batteries takes place in
reverse order
• Ensure that the battery cage sockets/plugs
have been correctly refitted. A polarity
diagram is located in each battery case
cover.
•
Front battery
•
The battery case socket is located at the front
(flange central).
• Socket side A is on the left in the direction of
travel.
•
Socket side B is on the right in the direction
of travel.
•
The battery case plug is located at the rear
(flange flush).
•
Plug side A is on the left in the direction of
travel.
•
Plug side B is on the right in the direction of
travel.