Invacare Bora Service Manual page 44

Repairing the flat tyre
• Unscrew valve cap.
• Depressurise tyre by pressing in the pin in the
valve .
• Unscrew the 5 Allen screws (back of the
wheel, 2).
• Remove the rim halves from the tyre.
• Remove the inner tube from the tyre.
• Repair inner tube and replace, or insert new.
NOTE:
If the old inner tube is to be repaired and re-used, and has become wet during repair, you can
make replacement easier by sprinkling the inner tube with a little talcum powder.
• Put the tyre back on the rim.
• Ensure that the tyre outer is seated correctly.
• Pump the tyre up to the prescribed pressure.
• Check that the tyre is seated correctly once again.
• Screw the valve cap back on.
• Refit the wheel.