•
Remove legrests.
•
Release seat (1) and tilt forwards.
•
Disconnect the remote bus cable from the
electronics module or ACT.
•
Lift the seat out of the front anchorage and
remove it. When doing so, get the help of a
second person because the seat is heavy.
•
Remove both battery cases as described in
Chapter 7.5.1.
•
Pull the adjusting motor plug out of the
electronics module.
• The adjusting motor cable is secured inside
the frames with cable ties. Remove the cable
ties with the oblique pliers.
• Remove the SL fuse (2) on the bottom fixing
bolt (1) with the screwdriver.
• Pull the fixing bolt (1) out.
• Remove the SL fuse (2) on the top fixing bolt
(1) with the screwdriver.
• Pull the fixing bolt (1) out.