Physical Description; Front Panel; Rear Panel - Allied Telesis AT-FS704 Installation Manual

Physical Description

Front Panel

The AT-FS704 front panel consists of 4 (10/100 Mbps MDI-X) (Media
Dependent Interface with Crossover) ports, 1 Uplink (MDI) port and LED
indicators, as shown in Figure 2.
10BASE-T/100BASE-TX
4 PORT ETHERNET SWITCH

Rear Panel

The rear panel of the AT-FS704 consists of an AC power connector, as shown
in Figure 3. Supported input voltages range from 100 ~ 240 V AC at 50 ~ 60 Hz.
1 2
100M
LINK/ACT
FULL DUP
POWER
COLN
LED Indicators
Figure 2 AT-FS704 Front Panel defined
Figure 3 Rear Panel View of the AT-FS704
3 4
=
1 X
To HUB To PC
Uplink Port (MDI)
10/100M Ports (MDI-X)
AC Power Connector
AT-FS704 Installation Guide
2X 3X 4X
POWER
3